RED DEVIL INCORPORATED -- SILICONE SEALANT  -- 8030-00B180010
<pre>=====================  Product Identification  =====================

Product ID:SILICONE SEALANT
MSDS Date:01/01/1988
FSC:8030
NIIN:00B180010
=== Responsible Party ===
Company Name:RED DEVIL INCORPORATED
Address:WEBB STREET
Box:A
City:PRYOR
State:OK
ZIP:74362
Country:US
Emergency Phone Num:918825-5744
CAGE:DO902
=== Contractor Identification ===
Company Name:RED DEVIL INCORPORATED
Address:WEBB STREET
Box:A
City:PRYOR
State:OK
ZIP:74362
Country:US
CAGE:DO902
Company Name:RED DEVIL, INCORPORATED
Address:ONE WEBB STREET
Box:A
City:PRYOR
State:OK
ZIP:74361
Country:US
Phone:918-825-5744
CAGE:23577

=============  Composition/Information on Ingredients  =============

Ingred Name:TITANIUM DIOXIDE (IN WHITE PRODUCT ONLY)-(AS NUISANCE
    PARTICULATE,TOTAL)
OSHA PEL:15
ACGIH TLV:10

Ingred Name:SILICA(AS AMORPHOUS SILICA,TOTAL DUST)
OSHA PEL:20
ACGIH TLV:20

Ingred Name:ETHYL TRIACETOXYSILANE-(AS ACETIC ACID)
OSHA PEL:10
ACGIH TLV:10

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Effects of Overexposure:EYE,NOSE AND THROAT IRRITATION.POSSIBLE SKIN
    IRRITATION.

=======================  First Aid Measures  =======================

First Aid:EYES:IMMEDIATELY FLUSH EYES W/LARGE AMOUNTS OF WATER WHILE
    HOLDING THE EYELIDS OPEN.GET MEDICAL ATTENTION IF IRRITATION
    PERSISTS.SKIN:WIPE MATERIAL FROM SKIN WITH CLOTH OR PAPER
    TOWEL,THEN WASH EXPOSE D AREA WITH SOAP AND WATER.GET MEDICAL
    ATTENTION IF IRRITATION PERSISTS.INHALATION:MOVE VICTIM TO FRESH
    AIR.GET MEDICAL ATTENTION.INGESTION:CONTACT LOCAL POISON CONTROL
    CENTER OR PHYSICIAN IMMEDIATELY

=====================  Fire Fighting Measures  =====================

Flash Point:>200 F
Extinguishing Media:CARBON DIOXIDE OR FOAM
Fire Fighting Procedures:NO SPECIAL PROCEDURES REQUIRED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR PERSONAL PROTECTIVE EQUIPMENT.CLEAN UP
    WITH ABSORBANT MATERIAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN CLOSED CONTAINER IN DRY
    AREA.NOTE:DO NOT WEAR CONTACT LENSES WHILE APPLYING THIS
    MATERIAL,AS ACETIC ACID VAPOR MAY BECOME TRAPPED IN LENSES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY REQUIRED.IF TLV IS EXCEEDED,OR FOR
    SYMPTOMS OF OVEREXPOSURE,WEAR A NIOSH-APPROVED RESPIRATOR FOR
    ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST MAY BE NECESSARY UNDER SOME HANDLING/USE
    CONDITIONS.
Protective Gloves:NEOPRENE OR CHEMICAL RESISTANT IF NEEDED
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Vapor Density:>1
Spec Gravity:>1
Solubility in Water:INSOLUBLE
Appearance and Odor:THICK LIQUID;SLIGHT VINEGAR ODOR.
Percent Volatiles by Volume:<5

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MOISTURE WILL RELEASE ACETIC ACID VAPOR.
Stability Condition to Avoid:EXTREME HEAT
Hazardous Decomposition Products:SILICON DIOXIDE,CARBON MONOXIDE,CARBON
    DIOXIDE,TRACES OF FORMALDEHYDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL,STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.