PPG INDUSTRIES INC -- SEAL GRIP STAIN BLOCK PR, 17-21 (110193E) -- 8010-00N065459 
=====================  Product Identification  =====================

Product ID:SEAL GRIP STAIN BLOCK PR, 17-21 (110193E)
MSDS Date:11/09/1993
FSC:8010
NIIN:00N065459
=== Responsible Party ===
Company Name:PPG INDUSTRIES INC
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Country:US
Info Phone Num:412-492-5555
Emergency Phone Num:304-843-1300
CAGE:DO542
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC
Box:UNKNOW
CAGE:PPGXX
Company Name:PPG INDUSTRIES INC. COATINGS & RESINS GP
Address:4325 ROSEANNA DR PO BOX 9
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Phone:412-492-5555
CAGE:DO542

=============  Composition/Information on Ingredients  =============

Ingred Name:ZINC OXIDE (SARA 313) (CERCLA)
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: 1-2%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:CARBONIC ACID, CALCIUM SALT (1:1); (CALCIUM CARBONATE)
CAS:471-34-1
RTECS #:FF9335000
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
    SILICATE)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 5-10%
OSHA PEL:20 MPPCF Z-3
ACGIH TLV:2 MG/M3 RDUST

Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 10-15%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:WATER; (TAP WATER)
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 10-15%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ETHYLENE GLYCOL (SARA 313) (CERCLA)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 1-2%
OSHA PEL:N/K 
ACGIH TLV:C 50 PPM,VAPOR
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:WATER; (DEIONIZED WATER)
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 30-35%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:FILM,FORMERS, RESINS, & ADDITIVES
Fraction by Wt: 20-25%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:EFTS OF OVEREXP:OVEREXPOS ARE NOT EXPECTED, THERE IS NO
    SIGNIFICANT HAZ FOR MAN. PROD CNTNS ETHYLENE GLYCOL (ING 10)
RTECS #:9999999ZZ

Ingred Name:ING 9:WHICH MAY CAUSE KIDNEY & LIVER DAMAGE AND WHICH HAS
    BEEN SHOWN TO CAUSE BIRTH DEFECTS IN LAB ANIMALS.
RTECS #:9999999ZZ

Ingred Name:OTHER PROT EQUIP:NITRILE, NEOPRENE OR LATEX.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL. EYE:CAUSES IRRIT
    INDICATED BY REDNESS, ITCHING, BURNING SENSATION & VISUAL DISTURBS.
    SKIN:MAY CAUSE SLIGHT IRRIT INDICATED BY DRYNESS, ITCHING,
    CRACKING, BURNING, REDNESS & SWELL . INHAL:VAP & SPRAY MIST MAY BE
    HARMFUL. VAP GENERATED @ ELEVATED TEMPS IRRITS EYES, NOSE & THROAT.
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:CHRONIC:AVOID LONG TERM & RPTD CONT.
    PROD CNTNS TITANIUM DIOXIDE. ANIMALS INHAL MASSIVE QTYS OF ING 4
    DUST IN LONG-TERM STUDY DEVELOPED LUNG TUMORS. STUDIES W/HUMANS
    INVOLVED IN MFR OF PIGME NT INDICATE NO INCRD RISK OF CANCER FROM
    EXPOS. POTNTL FOR INHAL OF ING 4 DUSTS FROM COATING IS VERY LTD.
    SINCE (ING 9)

=======================  First Aid Measures  =======================

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
    FOR @ LST 15 MIN. SKIN:FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY
    WASHING W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP
    & OTHE R SUPPORTIVE MEASURES AS REQ. OTHER:IF INGEST, ANY TYPE OF
    OVEREXP/SYMPS OF OVEREXP OCCUR DURING/FOLLOWING USE OF PROD, CONT
    POIS CTL CTR, EMER ROOM/MD IMMED; HAVE MSDS INFO AVAIL.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Extinguishing Media:USE NATL FIRE PROT ASSOC (NFPA) CLASS B EXTINGS
    (CARBON DIOXIDE, DRY CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) (SUP
    DAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    . WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
    CNTNRS TO PVNT PRESS BUILD-UP & (SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
    (DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
    NIOSH/MSHA APPRVD RESP, SKIN & EYE PROT SHOULD BE PERMITTED IN
    AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
    VERMICULITE/OTHER ABSORB  MATL & PLACE INTO CNTNRS FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
    CLASS IIIB LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
    SYSTEM, READ THE MATERIAL SAFETY DATA SHEET(S) FOR THE OTHER
    COMPONENT OR COMPONENTS BEFORE BLENDING AS THE RESULTING MIXTURE
    MAY HAVE THE HAZARDS OF A LL ITS PARTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A
    NIOSH/MSHA APPROVED SUITABLE RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
    KEEP CONC OF INGS BELOW LOWEST SUGGEST EXPOS LIMS, LEL (SUPDAT)
Protective Gloves:NITRILE, NEOPRENE OR LATEX GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER 
    WEAR PROT CLTHG, INCLUDING IMPERMEABLE APRON CONSTRUCTED OF (ING
    11)
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
    SHOES.
Supplemental Safety and Health
EXTING MEDIA:DESIGNED TO EXTING NFPA CLASS IIIB LIQ FIRES. FIRE FIGHT
    PROC:POSS AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER IS
    USED, FOG NOZZS ARE PREF. HAZ DECOMP PRODS:MONOXIDE, ZINC OXID E.
    VENT:IN FIRE/EXPLO SECTION BELOW STATED LIM, & REMOVE DECOMP PRODS
    DURING WELDING/FLAME CUTTING.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17.2
Vapor Density:HVR/AIR
Spec Gravity:1.29
Evaporation Rate & Reference:33 (BUAC=100)
Solubility in Water:58.1%
Appearance and Odor:VISCOUS LIQ W/ODOR CHARACTACTERISTIC OF CHEMICAL
    FAMILY & SOLVS LISTED IN INGS.
Percent Volatiles by Volume:62.06

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
    OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID CONTACT WITH STRONG ALKALIES, STRONG
    MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
    HEATED. WELDING, BRAZING/FLAME CUTTING MAY PRDCE FUMES
    INCLUDING:CARBON (SUPP DATA)

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
    WITH FEDERAL, STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL
    REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
    THROUGH AN APPROVED WAS TE MANAGEMENT FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.